Omron V440-F, User Manual

Page: 42 / 500

2-11
2 Quick Start
V440-F C-Mount Code Reader User Manual
2
-4 Co
nn
ect t
o
W
e
bLin
k
2
2
-4-1
Web
Link System R
equir
ements
2-4 Connect to WebLink
• Microsoft Windows 10 64-Bit or Microsoft Windows 7 64-Bit
Note: Using an Embedded OS Windows CE and / or an underpowered machine limited RAM or
limited disk space is not recommended.
• Intel Core i3 Duo Processor
• 2 GB RAM / 128 MB Video RAM
• 1 GB Hard Drive Space
• 32-Bit Color Display
• 4.0 Windows Experience Index
• Google Chrome Recommended
• Firefox
• Microsoft Edge
• Opera
• Safari Mac-Only
WebLink requires certain features to be supported by the hosting browser. Support for these features is
verified before WebLink loads, and if the features are not supported, an error message is displayed.
The following features are required by WebLink and are checked at startup:
• Web Sockets
• HTML5 Canvas
• HTML5 Audio
1
Navigate to Control Panel > Network and Sharing Center on your PC.
2
Click Local Area Connection 4 . In the Status dialog, click Properties .
3
In the Local Area Connection Properties dialog, select Internet Protocol Version 4
(TCP/IPv4) and click Properties again.
4
Set your PC to a 192.168.188.X IP address (192.168.188.5, for example) .
5
Click OK .
6
Open a web browser and type the reader’s default IP address (http://192.168.188.2) in the
web browser’s address bar. Note that the IP address may have been set to a different address
by another user. Use the
Device Discovery Utility (DDU) – described in section 2-3-4 – to
determine the exact IP address of the reader.
7
The reader will connect to WebLink.
2-4-1 WebLink System Requirements
Operating System Requirements
Hardware and Performance Requirements
Browser Requirements
Browser Feature Requirements
2-4-2 V440-F Static Connection