Omron V440-F, User Manual

Page: 328 / 500

G-23
Appendices
V440-F C-Mount Code Reader User Manual
G-14 Po
stal Sym
bol
ogie
s
G
G-14-
1 Postal Symbology T
ype
G-14 Postal Symbologies
Important: Postal Symbologies
must have a minimum pixels-per-element value of
4
to be decoded
reliably by the reader.
The reader must be configured to specific read range, field of view, and reader parameters before decoding
Postal Symbologies.
For optimal decode results, position the symbol as close to the center of the reader’s field of view as
possible.
When
U.S. Post
is enabled (
<K460,1>
), the reader will only decode
POSTNET
,
PLANET
, and
USPS4CB
symbols.
Important: POSTNET Status
,
PLANET Status
, and
USPS4CB Status
are enabled by default. However,
if any of the three U.S. Post symbologies is set to
disabled
individually, symbols of that type will not be
decoded by the reader even when U.S. Post is enabled.
For example, if
U.S. Post
is enabled but
POSTNET Status
is disabled (
<K460,1,0>
),
POSTNET
symbols will not be decoded by the reader.
See
POSTNET Status
,
PLANET Status
, and
GS1 DataBar
for more detail about U.S. Post
symbologies.
When
Australia Post
is enabled (
<K460,2>
), the reader will only decode Australia Post symbols.
When
Japan Post
is enabled (
<K460,3>
), the reader will only decode Japan Post symbols.
When
Royal Mail
is enabled (
<K460,4>
), the reader will only decode Royal Mail symbols.
G-14-1 Postal Symbology Type
Usage:
The following 1D
Postal Symbologies
are used in mail sortation, auditing,
certified mail, registered mail, metered mail, and point-of-sale (POS) applications.
Definition:
Determines the postal symbology that will be decoded by the reader.
Serial Cmd:
<
K460, postal symbology type
,
POSTNET status,PLANET status,USPS4CB
status
>
Default: Disabled
Options: 0 = Disabled
1 = U.S. Post (POSTNET, PLANET, USPS4CB)
2 = Australia Post
3 = Japan Post
4 = Royal Mail
5 = KIX
6 = UPU
U.S. Post (POSTNET, PLANET, USPS4CB)
Australian Post
Japan Post
Royal Mail