Omron V440-F, User Manual

Page: 439 / 500

Appendices
M-2 V440-F C-Mount Code Reader User Manual
M-1 Operational Commands
Type Command Name
Counter
Request/Clear
<q>
No-Reads Per Read Cycle Counter
<q0>
No-Reads Per Read Cycle Counter Reset
<$>
Mismatch Per Read Cycle Counter
<$0>
Mismatch Per Read Cycle Counter Reset
<N>
No-Read Counter
<O>
No-Read Counter Reset
<T>
Trigger Counter
<U>
Trigger Counter Reset
<V>
Match Code Counter
<W>
Match Code Counter Reset
<X>
Mismatch Counter
<Y>
Mismatch Counter Reset
Firmware Verifica-
tion
<#>
Request All Part Numbers
<#a>
Request Application Firmware Part Number
<#b>
Request Boot Code Firmware Part Number
<!>
Request All Firmware Checksums
<!a>
Request Application Firmware Checksum
<!b>
Request Boot Code Firmware Checksum
<!s>
Request Current Parameter Settings Check-
sum
Read Rate
<C>
Decodes Per Second Test
<Cp>
Decode Percent Test
<J>
Exit Read Rate Tests
<a1>
Preface PDF417 Output with Data Attributes
Device Control
<L1>
Pulse Programmable Output 1
<L2>
Pulse Programmable Output 2
<L3>
Pulse Programmable Output 3
Read Cycle
Enable/Disable
<I>
End Current Read Cycle until <
H
>
<H>
Enable Read Cycle after <
I
>
<l1>
1
Activate Targeting System
<l0>
2
Deactivate Targeting System
Parameter
Reset/Save
<A?/1>
Complete Reset when Resets or Save for
Power-On Command Has Been Issued
<A?/0>
Warm Reset if Power-On Command Has
Been Issued
Resets
<A>
Software Reset, Current Parameters
Retained
<Ard>
Software Reset, Recall Default Parameters
except Communication and Custom Unit
Name Parameters
<Arp>
Software Reset, Recall Power-On Default Parameters
<Arc>
Software Reset, Recall Customer Default
Parameters
1
<l1>
= lowercase ‘L’, one
2
<l0>
= lowercase ‘L’, zero