Omron V440-F, User Manual

Page: 103 / 500

4 Setup
4-40 V440-F C-Mount Code Reader User Manual
The order of the Selection Rules define order the data will be output. In the example below, all the QR
codes will be output, then the Unique ID that is labeled as 1 will be output. Then all the codes within the
Matrix. It is important to note that while the start position for the Matrix output is defined by the Selection
Rule, the actual output order for the individual codes within the Matrix will follow the
Global Sorting
option that is set.
Selection Rules for Unique ID
For a
Unique ID
, the
Selection
criteria is
Symbology Type
,
Data
content, data
Length
or
Unique ID
label number. The only important criteria in this case is Unique ID number. When you select that label
number, the decode data from that
single code
which is set up using the
Configuration Database
is
inserted into the output string at the set location.
Note:
A Unique ID always refers to a single labeled code.
Note:
A Unique ID number must appear only once in the output builder. The Unique ID must not be
used on more than one
Selection Rule
.
Symbol Parsing allows the user to modify the contents of the decode data strings before they are put
into the output string. There are two functions or rules that can be applies.
• Parse
– Extract parse multiple substrings from the original symbol data and insert them in the new
output string.
• Insert
– Insert custom text into the output string.
Note:
Only one parsing sequence can be set up. It will be applied to all groups where Symbol Parsing
is checked on. All codes within a checked group will be affected.
4-8-3 Symbol Parsing and Insertion