Omron V440-F, User Manual

Page: 457 / 500

Appendices
N-4 V440-F C-Mount Code Reader User Manual
N-3 Format Assign
N-3-1 Symbol Number
Definition: Symbol Number
refers to the number of the symbol to which output formatting will
apply. For example, if you wish to enable user-defined formatting to symbol # 2 in a
multisymbol read cycle, you would send the command
<K742,2,1>
.
Note that the number of symbols may exceed the format capabilities.
Serial Cmd:
<
K742
,
symbol number ,status>
Options:
1 to 400
1 = Formatted output status for symbol # 1.
2 = Formatted output status for symbol # 2.
...(Cont.)
400 = Formatted output status for symbol # 400.
N-3-2 Status
Definition: Status
refers to the user-defined formatting of a selected symbol position in the read
cycle result. Note that there is also a global formatting “enable” command that must be
set for the formatting to be applied.
Serial Cmd:
<
K742
,
symbol number, status >
Default: Disabled
Options: 0 = Disabled
1 = Enabled (Assigns parameters to specified symbol.)