Omron V440-F, User Manual

Page: 38 / 500

2-7
2 Quick Start
V440-F C-Mount Code Reader User Manual
2-
3 Co
nnec
t th
e System
2
2
-3-1
S
ystem Configur
ation Examples
2-3 Connect the System
The following hardware configuration diagrams demonstrate some of the many ways the V440-F Reader can be
deployed in an application. These configurations show Omron lenses and lighting. The V440-F can be used with
any vendor’s lenses and lighting. Lighting can be either directly powered, or can use Strobe Out pulse on DIO 3.
2-3-1 System Configuration Examples
Example 1: FLV Series or Other External Lighting
Dwg. Ref. Category Part Number
1 C-Mount Lens 3Z4S-

, 98-9000

‐ 01
2 V440-F C-Mount 5 MP Camera V440-FXXXY50M-NN 
3 Industrial High-Flex GigE Ethernet Cable with Jack Screws and RJ45 Connector 98-00013

-0

4
PoE (Power over Ethernet) Select a cable that can supply power via Ethernet.
Industrial Switching HUB Example: W4S1 Series
5 M12-to-Flying Leads Cable V430-W8  -  M
6 FLV Lighting FLV-

7 Lighting Controller FLV-ATC

, 3Z4S-LTIDGB

*1. The V430-WQ cable (excluding V430-WQR / V430-WQK) can be used as an extension of the V430-W8 cable.
*2. A 24VDC power supply is not needed for the V440-F if a PoE switching HUB is used.
*3. Any vendor’s lighting and power supply can be used with the V440-F. The I/O cable provides strobe signal to light power supply.