Omron V440-F, User Manual

Page: 169 / 500

6 Application Settings
6-22 V440-F C-Mount Code Reader User Manual
6-11 Activate Account Management
Activate Account Management
allows you to set a password that will be required to open any session
of WebLink. An
Administrator
can create, update, and delete users from an Administrator user
interface. While
Account Management
is active, every user must log in with a username and
password established by the Administrator. There are three different user types, each with a different
privilege level that determines their access:
• Administrator:
Full Access as well as the ability to manage user accounts and enable or disable
Account Management
• Controller:
Full Access
• Monitor:
View-Only Access
Click the
gear
icon at the upper right of the WebLink user interface to open the
Application Settings
menu.
Then click
Activate Account Management
to open the dialog shown below.
Enter and verify a new username and password and then click
Activate Account Management
to
password-protect the WebLink configuration.
The Activate Account Management button brings up a dialog allowing you to create an Administrator
account and to Activate Account Management. This is the same account information that you will use to
log in to the application later, so be sure to remember it. After entering valid credentials, click the blue
Activate Account Management
button. Clicking this button will create the Administrator account and
will restart the application.