3 Start
3-4
V440-F C-Mount Code Reader User Manual
3-2
Assisted Setup
When you click the
Assisted Setup
button in the
Start
view, a dialog will appear asking you a series of
application-based questions. Based on your answers, WebLink generates your initial setup
automatically. Once the setup is created, you can fine-tune its parameters in the
Setup
view.
The Assisted Setup dialog is designed to be logical and intuitive, and follows this sequence:
•
You are asked which code types you will be reading in your application. Code types can be added by
clicking directly in the code type field and selecting them from a drop-down menu.
•
Then you are asked how many codes you need to read at once in a single read cycle. Type the
number of codes you need to read directly in the text field or select a number using the up and down
arrows.
•
You are then given a selection of four application types, which represent the available selections in
the
Cycle
area of the
left panel
in the Setup view. The icons represent the
Presentation
,
Continuous
,
Triggered
, and
Start / Stop
Cycle Types.
•
The next question is whether or not you need the decoded data to match an existing string of data.
This enables or disables
Match String
.
•
If the answer to the previous question is
Yes
, a follow-up question appears asking for the exact
output string that the decoded data must match. If the answer to the previous question is
No
, the
follow-up question does not appear.
•
Finally, you are asked if you want to rename the reader. If
Yes
, a text field appears in which you can
type the reader's new name. The reader's MAC ID is also shown to the right of the text field.
•
Click
Create Setup
to configure your WebLink setup automatically based on your answers to the
Assisted Setup questions.
Note:
Reader settings are defaulted when Assisted Setup settings take effect.
Summary of Contents for V440-F
