8-15
8 Advanced Settings
V440-F C-Mount Code Reader User Manual
8-
5 S
ymb
o
log
ie
s
8
8-5
-1 Symbolo
gies Menu
DotCode
is a special code type that can be enabled using the standard Code Type dialog box or using
Advanced Settings.
Important:
When DotCode is enabled, no other symbologies will be decodable. You must disable
DotCode to decode symbols of any other type.
DotCode parameters can be found in the Symbologies menu located in WebLink’s Advanced Settings.
Rotation
– DotCode will look for either horizontal or vertical codes with no rotation plus or minus 3
degrees. You can set
Rotation Mode
to
Low Rotation
plus or minus 10 degrees or to
Omnidirectional
.
Rows and Columns
– When using DotCode, you can specify the exact number of rows and columns in
the code to minimize the possibility of decoding errors and no reads. If you specify the exact row and
column dimensions, only DotCode symbols of the same dimension are decoded.
To do this, you must enter the row and column values using a
K command
via the
Terminal
under
Settings
, or via another serial link.
Important:
DotCode must be enabled for the column and row settings to take effect.
Serial K Command:
<K561,
Custom Feature Command String>
Default Setting:
“ ”
Options:
DOTCODE_COL_ROW=?#?#
The
?
character in
DOTCODE_COL_ROW=?#?#
should be changed to the expected number of
columns and rows in the DotCode symbol.
In the example below,
40
is the number of columns, and
7
is the number of rows.
<K561,DOTCODE_COL_ROW=40#7#>
Swap columns and rows when the same symbol is oriented vertically.
<K561,DOTCODE_COL_ROW=7#40#>
Dot Code
Summary of Contents for V440-F
