Omron V440-F, User Manual

Page: 452 / 500

M-15
Appendices
V440-F C-Mount Code Reader User Manual
M-9 Oth
er Op
eratio
nal Serial Co
mm
and
s
M
M-
9-2 Y-
Modem Upload T
ransfer Options
Format:
<UNOPT>
: Initiates an Un-Optimize operation.
This command will cause the product to discard any information acquired during a Optimize operation.
The Un-Optimized state can be saved for a power-on condition, using the
<Z>
command.
Format:
<OPT?>
: Responds with Optimize Status
This command will return the current status of the OPT operation.
Response:
<OPT,0>
: Default, not optimized
<OPT,1>
: Optimize operation in-process
<OPT,2>
: Symbol optimized
The Optimize state and parameters persist the same as ordinary parameters. Examples:
•
A unit in the optimized state has not been saved. A power cycle will remove any optimized state
information and the unit will come up in its configured state.
•
A unit is saved in a optimizing state. The unit will come from power up in the optimizing state and
optimize the first symbol read.
•
A unit is saved in a optimized state. The unit will come from power up in the optimized state and only
read the optimized symbol type.
•
A optimized unit is issued a reset default command
<Ard>
. The unit will return to an un-optimized
state but if power is cycled will return to its saved state.
<uy,
path,filename
>
<
dy, path,filename
>
<op,9>
Manages files in a selected directory.
Un-Optimize Symbol
Optimize Status
Optimize Persistence
M-9-2 Y-Modem Upload Transfer Options
M-9-3 Y-Modem Download Transfer Options
M-9-4 Image Library Request
File Source Explanation
(Nothing)
All files in “root” directory
/
All files in “root” directory
/saved
All files in “saved” directory
*.*
All files in all directories
/del
Deletes all files in the root directory
/saved/del
Deletes all files in the saved directory
del*.*
Deletes files in all directories