![background image](http://html.mh-extra.com/html/omron/nt11s/nt11s_operation-manual_744536150.webp)
134
Responding to Displayed Error Messages
Section 6-2
6-2-2
Errors Occurring During Operation
The table below shows the errors that can occur during operation of the NT11S
and their remedies.
Message
Cause
Remedy
QQ command is not avail-
able
NT11S connected to an incompatible
PC.
Connect the NT11S to a compatible PC.
Setting Error
Bits or words allocated to the PC
memory cannot be found in the
screen data.
Check the memory area in the PC and correct the bit
and word allocations in the screen data.
Specified Screen Cannot
Be Saved
An unregistered screen number is
specified in screen switching.
Specify a registered screen number.
Specified Screen Cannot
Be Saved
An unregistered screen number is
specified in screen switching.
Transfer the screen corresponding to the specified
number from the support tool.
6-2-3
Errors Occurring on Screen Data Initialization and Transfer
The table below shows the errors that can occur when data is written to the NT11S
screen data memory, and their remedies.
Message
Cause
Remedy
Initialization Error
Hardware fault or screen data
memory life reached
If the same message is displayed even after executing
screen data memory initialization or screen data trans-
mission several times, contact your OMRON service
center.
Summary of Contents for NT11S
