![background image](http://html.mh-extra.com/html/omron/nt11s/nt11s_operation-manual_744536047.webp)
31
Connection to a PC by the Host Link (RS-422A Type)
Section 2-5
2-5
Connection to a PC by the Host Link (RS-422A Type)
Connect the NT11S to an OMRON PC by using the RS-422A type host link meth-
od.
If the distance between the NT11S and the PC is greater than 15 m, this method
should be used. The maximum distance over which a connection can be made is
500 m.
when using the RS-422A method, the host computer and PC are usually con-
nected in a 1 to N ratio (more than one PC), but in the special case of the connec-
tion between the NT11S and PC, the ratio is 1 to 1.
In order to make a connection to the PC using the host link method (RS-422A
type), the “Comm. Type” memory switch of the NT11S must be set to the host link,
and the “Comm. Port” memory switch must be set to RS-422A. For details on
memory switch settings, see “Selecting the Host Communication Method” (page
58).
2-5-1
Compatible PCs
Some models and series of OMRON PCs have the host link function built in.
Check the model and series of the PC against the type of host link unit before mak-
ing the connections.
The compatible PCs are listed in the table below.
PC Series
Units with Built-in Host Link Function
Connectable to
PC Series
Host Link Unit
CPU Unit
Connectable to
C200H-LK201-V1
C200H-LK202-V1
C200HS-CPU21-E
C200HS-CPU23-E
C200HS-CPU31-E
C200HS-CPU33-E
C200HS
C series
CQM1-CPU21-E
CQM1-CPU41-E
CQM1-CPU42-E
CQM1-CPU43-E
CQM1-CPU44-E
CQM1
Summary of Contents for NT11S
