Omron NT11S, Operation Manual

Page: 123 / 183

107
Memory Tables and Bar Graph
Section 5-2
S
Setting the words for the character-string memory tables
The character-string memory tables can be allocated to the following PC words.
Set the word type and the first word.
Symbol Area Name Allocated
DM Data memory
f
CH Internal/Special Relay
f
TIM Timer
×
CNT Counter
×
HR Holding Relay
f
AR Auxiliary Relay
f
LR Link Relay
f
f
: OK
×
: NG
If the “number of registration words x 2” (“word setting window”) set with the sup-
port tool is larger than the “number of character digits” (“character-string display
setting” window), the character-string may be broken halfway.
The range of respective area varies with the type of PC. Refer to Appendix H PC
Memory Map (page 160).
Writing Numerals to the Numeral Memory Table
Since numeral memory tables can be allocated to PC words, it is possible to write
data into the numeral memory tables from the PC and to set the initial values dur-
ing screen data creation.
The numeral display area where the
numeral memory table No. 2 is allocated
Defect =
The bar graph display area where the
numeral memory table No. 4 is allocated
Word
The contents are the same while they are displayed.
Can be updated by the PC.
NT11S PC
Numeral memory table
During the operation, the display contents are automatically updated so that the
contents of the numeral memory table being displayed are the same as that of the
PC word.