![background image](http://html.mh-extra.com/html/omron/nt11s/nt11s_operation-manual_744536094.webp)
78
Outline of Functions
Section 4-2
4-2-2
Characters and Figures Which can be Displayed
The NT11S screen can display characters, bar graphs, and other various ele-
ments.
This section describes the types and attributes of the characters and figures which
can be displayed and do not need to be changed at all.
For the settings, display, and use of the characters, numeric values, and graphs
which change according to the system operation status and other conditions, refer
to Section 4-4 Memory Tables (page 81) and Section 5-2 Memory Tables and Bar
Graph (page 106).
The power of expression of the screen can be increased by giving various attrib-
utes such as the enlarged or reverse display to the characters and figures.
The character and figure attributes can be set in the edit screen when creating the
screen data by using the support tool.
Types and Attributes of Characters and Figures
The following types of characters can be input by using the support tool and be
displayed during operation.
Character
Type
Dots
(vertical x
horizontal)
Character Set
Maximum Number of
Characters Displayed in One
Screen (without overwriting)
Normal height
characters
8 x 16
Alphanumerics and
symbols
20 characters x 4 lines
(80 characters)
Marks
8 x 16
Create by using the
support tool
S
Marks
A mark is a graphic pattern created by 8 (horizontal x16 (vertical) by using the
support tool. Marks can be handled the same as the normal size characters. Up
to 64 patterns can be defined within the total screen data.
Summary of Contents for NT11S
