![background image](http://html.mh-extra.com/html/omron/nt11s/nt11s_operation-manual_744536037.webp)
Caution
Correct Use
21
Description of Parts and Settings
Section 2-1
S
In addition to the DIP switches, set also the “Comm. Method”, “Host Link
Speed”, “Automatic Reset”, etc. at the memory switches. For these settings, re-
fer to Section 3-7 “Setting the Conditions of Communications with the PC by Us-
ing the Memory Switches” (page 57)
S
After changing the switch settings, always press the reset switch or turn the
power off and back on.
Otherwise the system will not operate as expected.
S
Confirm system safety before turning the power ON/OFF or resetting.
Otherwise the system may operate unpredictably.
Use the “System program erase” function only when changing the system pro-
gram.
It the system program is erased, it will not be possible to use the functions of the
NT11S unless another system program is transferred.
If the DIP switch settings have been changed when the NT11S is powered, reset
the power to the NT11S. The changes with the DIP switches become effective
only after the power supply is reset.
Summary of Contents for NT11S
