Omron NT11S, Operation Manual

Page: 109 / 183

Reference
93
Daily Report/Display History Printing Function
Section 4-10
4-10-2 Printing Display Histories
The data recorded by the display history screen function can be printed.
This section explains the procedure for printing display histories.
Printing format In display history printing, the display number, display time, and comment for the
displayed screen are printed in a fixed format.
S
Items set with the support tool
- Attribute of the displayed screen
- Comment for the displayed screen
S
Example printout
NO. DATA--TIME SCREEN COMMENT
0001 02/04--08:32 0001 LINE ERROR
0002 02/04--10:21 0005 MOTOR ERROR
0003 02/04--10:48 0019 COMPRESSER ERROR
0004 02/04--11:50 0005 MOTOR ERROR
0005 02/05--14:28 0019 COMPRESSER ERROR
0006 02/06--13:17 0040 PRESS
The NT11S does not incorporate a clock.
Time data is recorded by referring to the PC clock data.
Printing procedure Explained here is the procedure for printing a display history in response to an
instruction from the PC.
The printing instruction from the PC takes effect by setting the status of bit 5 (dis-
play history printing) of the PT status control area.
To designate printing, bit 5 of the PT status control area is set to “1”. One report is
printed each time bit 5 is set to “1”. To print the report again, the bit status must be
returned to “0” and then set to “1” again.
[PT status control bits of the PT status control area]
CH 0 0 0 0 0 0 0 0 0 0 0 0
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Display history printing bit
S
Setting at the support tool
Perform the following setting with the support tool.
PT status control area allocated word: CH0120