Omron NT11S, Operation Manual

Page: 18 / 183

2
Getting Starting
Section 1-1
1-1 Getting Starting
To ensure that the NT11S works correctly, carefully observe the following when
installing and handling it.
Location Do not install the NT11S in a location subject to the following conditions;
S
Near a computer, radio transmitter or receiver, etc.
S
Dust, chemicals, or steam
S
Severe temperature fluctuations
S
High humidity and condensation
S
Strong electrical or magnetic fields
S
Poor ventilation
S
Severe vibration
Handling Do not;
S
Subject the NT11S to strong shocks or vibrations
S
Put heavy objects on the NT11S
S
Supply a voltage different from the specified voltage
S
Disassemble or modify the NT11S
Cautions on Cleaning To clean the front panel, use a soft, dry cloth. If it is very dirty, use diluted (2%)
neutral detergent.
Do not use volatile solvents such as benzene, thinner, or a chemically treated
cloth. Their use will cause deformation or discoloration.
Cautions on Afterimage If the same screen contents are kept displayed for a long time, an afterimage may
occur. To prevent this problem, either set the afterimage prevention function or
make a program which periodically changes the displayed screen.
Cautions on Operating the System Keys
Do not operate the system keys with sharply pointed objects, such as your finger-
nails or a screwdriver.
This could break the film.