Omron NT11S, Operation Manual

Page: 137 / 183

Line 1
Qty. 800 unit
Numeral memory table entry number 3 (4-digit input)
Defect limit 30 unit
Numeral memory table entry number 4 (4-digit input)
1 2 3 4 5 6 7 8 9 0
CLR +/--
121
Numeral Setting
Section 5-3
Application Example This example shows the reading of the numeral memory table number after a val-
ue has been changed by inputting numerical data at the NT11S.
S
Setting at the support tool
Make the following settings using the support tool.
Allocated word for the PT status notify area : CH0110
Numeral memory table entry No.3: DM 0005 (saved word: One)
Numeral memory table entry No.4: DM 0006 (saved word: One)
Data registered for the screens:
Numeral setting 1 ... Reference table “numeral memory table No.3”
Numeral setting 2 ... Reference table “numeral memory table No.4”
S
PC program
Create the following PC ladder program.
@MOV(21)
111
DM0105
11211
(1)
Notification word for content upgrade memory table
Word that stores the numeral memory table number
Numeral setting
strobe flag
S
Program operation
(1) When the numeral setting strobe flag (bit 11211) comes ON (1), the contents
of CH 0111 (the word where the content upgrade memory table is located) are
transferred to DM 0105. The number of the numeral memory table that con-
tains the upgraded data is stored in DM 0105 (in this case it is 003 or 004).
If the numeral memory table is allocated to a PC word, the value input to it can
be read easily by referring to the allocated word.
In this case, the contents of numeral memory table No.3 are stored in DM
0005 and the contents of numeral memory table No.4 are stored in DM 0006.