Omron NT11S, Operation Manual

Page: 102 / 183

86
Numeral Setting
Section 4-6
The details for numeral attributes etc., are largely the same as for numeral display
(refer to “Numerals which can be Displayed” (page 82)).
4-6-2 Using Numeric Keys
To input numerical data at a numeral setting area during operation, first select the
numeral setting at which the data is to be input, and then input the numerical value
by pressing the numeric keys.
Selecting the Numeral Setting Area for Data Input
If there is more than one numeral setting area on the screen, select the one where
numerical data is to be input using the arrow keys. The numeral setting area cur-
rently selected for input is indicated by a frame (cursor) displayed around the input
area.
To select other numeral setting areas, use the , , and arrow keys. By
using these keys, the cursor can be shifted between multiple numeral setting
areas (to select the one where data is to be input) in the way shown in the figure
below.
6563
4568
5107
3200
0000
4624
Inputting Numerical Values Input numerical values using the following numeric keys: numerals (0 to 9), deci-
mal point (.), sign (+,--), clear (CLR), and return ([ENTER]).
S
Inputting the integer and decimal fraction parts
Input the integer and decimal fraction separately. First input the integer, then
press the decimal point key (.) and input the decimal fraction.
If the integer or decimal fraction exceed their respective allowable numbers of
display digits, they are shifted to the left.