Omron NT11S, Operation Manual, Page: 74 / 183

SYSTEM MENU
Quit
Transmit Mode
Maintenance Mode
PT Setting
I/O Check
Initialize Memory
Memory Switch
Page:
Auto-restart Yes
Backlight OFF 10min
Page:
Baud Rate 9600BPS
Comm. Port RS-232C
Comm. Type Host Link
Reference
58
Setting the Conditions of Communications with the PC by Using the Memory Switches
Section 3-7
3-7-1 Selecting the Host Communication Method
The NT11S can be connected to a PC by the host link or NT link. Either link can be
selected by setting the “Comm. Type” memory switch. The factory setting has
been made to the “Host link”.
Select the host communication method by the menu operation from the System
Menu as mentioned below.
Select “Maintenance Mode”
with the
key, then press “EN-
TER”.
Select “Memory Switch” with the
key, then press “ENTER”.
Display the next screen by
pressing the
key.
Pressing the [+/--] key while
“Comm. Type” is highlighted will
cause the selection for this item
to alternate between “Host Link”
and “NT Link”.
To quit after setting the selection made, press the “ENTER” key. To quit without
setting the selection made, press any two function keys simultaneously.
The communication method must be selected according to the method that the
connecting PC supports.