![background image](http://html.mh-extra.com/html/omron/nt11s/nt11s_operation-manual_744536048.webp)
32
Connection to a PC by the Host Link (RS-422A Type)
Section 2-5
2-5-2
Parts Required for Connection
The RS-422A cable used for RS-422A communications is not supplied by OM-
RON. Make this cable in accordance with the environment (PC used and transmis-
sion distance between the NT11S and PC).
One connector, one connector cover and one cable are required to make up a con-
necting cable. One connector and one connector cover is supplied with the PC.
However, a cable of the type recommended by OMRON must be prepared.
For details on making the cable, refer to “Making the Cable for Connection to the
PC (RS-422A Type)” in the appendix (page 150). The table below lists the compo-
nents supplied with each unit and the recommended cables.
Name
Model
Remarks
Connector
XM2A-0901
9-pin, manufactured by OMRON
- Delivered with C series CQM1
- Delivered with the following host link units:
C200H-LK202 (-V1)
DE-9P
9-pin, manufactured by JAE
- Delivered with the following host link units:
C200H-LK202 (-V1)
Connector
cover
XM2S-0911
9-pin, manufactured by OMRON
- Delivered with C series CQM1
- Delivered with the following host link units:
C200H-LK202 (-V1)
DE-CI-J6
9-pin, manufactured by JAE
- Delivered with the following host link units:
C200H-LK202 (-V1)
Cable
H-9293A
(CO-HC-ESV-3P
¢
7/0.2)
For RS-422A, manufactured by Hirakawa
Hewtech Corp.
Summary of Contents for NT11S
