SYSTEM MENU
Quit
Transmit Mode
Maintenance Mode
PT Setting
I/O Check
Initialize Memory
Memory Switch
Page:
Quit
LED Check
LCD Check
Page:
Tool I/F Input Check
Key Check
67
System Maintenance
Section 3-10
Key input check
Check the numeric keys, arrow keys, and function keys of the NT11S by perform-
ing the following operations, starting from the system menu.
Select “Maintenance Mode”
with the
key, then press “EN-
TER”.
Select “I/O Check” with the
key, then press “ENTER”.
Display the next page by press-
ing the
key.
Press “ENTER”.
All the keys to be checked are displayed on the screen.
0 1 2 3 4 5 6 7 8
F1 F2 F3 F4
. +/-- clr ENTER
9
Display when
the numeric key
[9] is pressed.
S
Press each of the numeric keys, arrow keys, and function keys on the panel of
the NT11S in turn.
If the corresponding key in the display is highlighted when the panel key is
pressed, it indicates that the key is operating normally.
S
To quit the key input check, press any two of the function keys simultaneously.
Summary of Contents for NT11S
