![background image](http://html.mh-extra.com/html/omron/nt11s/nt11s_operation-manual_744536066.webp)
Note
Initialize
Screen Memory?
Yes:[ENTER]
Initializing
Initialized the
Turn OFF the DIP-SW2-2
and Reset, then
return to RUN mode
Turn OFF the DIP-SW2-2
and Reset, then
return to RUN mode
Reference
50
Initializing Memory
Section 3-4
3-4-2
Initialization by Using the DIP Switch (Forced Initialization)
Be sure to turn the power OFF before setting the NT11S DIP switch.
Set the DIP switch as follows to initialize the screen data memory.
Operation 1.
Set DIP-SW2-2 on the NT11S to ON and turn the power ON.
Press “ENTER”.
The message shown to the left
is displayed during initialization.
On completion of initialization,
the message shown to the left is
displayed.
2.
Turn the NT11S power to OFF.
3.
Set NT11S DIP SW2-2 to OFF and turn the power ON.
You can quit without initializing the memory by simultaneously pressing any two of
the function keys while the “Initialize Screen Memory?” screen is displayed.
To change the system settings or to register the screen data, set DIP-SW2-2 to
OFF and call the System Menu screen by turning on the power to the NT11S while
pressing two of the four function keys.
The NT11S DIP-SW2-2 is used to set “Screen data forced initialize effective/inef-
fective”. Setting this to ON selects “effective”, and OFF “ineffective”.
Summary of Contents for NT11S
