Omron NT11S, Operation Manual

Page: 65 / 183

SYSTEM MENU
Quit
Transmit Mode
Maintenance Mode
PT Setting
I/O Check
Initialize Memory
Memory Switch
Initialize
Screen Memory?
Yes:[ENTER]
Initializing
Use the
Support Tool to set
the PT Control Area
and PT Notify Area
49
Initializing Memory
Section 3-4
Initialization by using the System Menu
Initialize the image data memory by following the procedure given below.
Select “Maintenance Mode”
with the
key, then press “EN-
TER”.
Select “Initialize Memory” with
the
key, then press “ENTER”.
Press “ENTER”.
The message shown to the left
is displayed during initialization.
On completion of initialization,
the message shown to the left is
displayed.
You can quit without initializing the memory by simultaneously pressing any two of
the function keys while the “Initialize Screen Memory?” screen is displayed.
When the screen data memory initialization has been completed, transfer the
screen data from the support tool.