APPENDIX
E5EK
A--4
J
Sensor Input Setting Ranges and Indication Ranges
Input
Setting Range
Indication Range
JPt100
-199.9 to 650.0 (C
°
) / -199.9 to 999.9 (F
°
) -199.9 to 735.0 (C
°
) / -199.9 to 999.9 (F
°
)
Pt100
-199.9 to 650.0 (C
°
) / -199.9 to 999.9 (F
°
) -199.9 to 735.0 (C
°
) / -199.9 to 999.9 (F
°
)
K1
-200 to 1300 (C
°
) / -300 to 2300 (F
°
)
-350 to 1450 (C
°
) / -560 to 2560 (F
°
)
K2
-0.0 to 500.0 (C
°
) / -0.0 to 900.0 (F
°
)
-50.0 to 550.0 (C
°
) / -90.0 to 990.0 (F
°
)
J1
-100 to 850 (C
°
) / -100 to 1500 (F
°
)
-195 to 945 (C
°
) / -260 to 1660 (F
°
)
J2
-0.0 to 400.0 (C
°
) / -0.0 to 750.0 (F
°
)
-40.0 to 440.0 (C
°
) / -75.0 to 825.0 (F
°
)
T
-199.9 to 400.0 (C
°
) / -199.9 to 700.0 (F
°
) -199.9 to 460.0 (C
°
) / -199.9 to 790.0 (F
°
)
E
0 to 600 (C
°
) / -0 to 1100 (F
°
)
-60 to 660.0 (C
°
) / -110 to 1210 (F
°
)
L1
-100 to 850 (C
°
) / -100 to 1500 (F
°
)
-195 to 945 (C
°
) / -260 to 1660 (F
°
)
L2
0.0 to 400.0 (C
°
) / 0.0 to 750.0 (F
°
)
-40.0 to 440.0 (C
°
) / -75.0 to 825.0 (F
°
)
U
-199.9 to 400.0 (C
°
) / -199.9 to 700.0 (F
°
) -199.9 to 650.0 (C
°
) / -199.9 to 999.9 (F
°
)
N
-200.0 to 1300 (C
°
) / -300 to 2300 (F
°
)
-199.9 to 460.0 (C
°
) / -199.9 to 790.0 (F
°
)
R
0 to 1700 (C
°
) / 0 to 3000 (F
°
)
-350 to 1450 (C
°
) / -560 to 2560 (F
°
)
S
0 to 1700 (C
°
) / 0 to 3000 (F
°
)
-170 to 1870 (C
°
) / -300 to 3300 (F
°
)
B
100 to 1800 (C
°
) / 300 to 3200 (F
°
)
-170 to 1870 (C
°
) / -300 to 3300 (F
°
)
W
0 to 2300 (C
°
) / 0 to 4100 (F
°
)
-70 to 1970 (C
°
) / 10 to 3490 (F
°
)
PL
0 to 1300 (C
°
) / 0 to 2300 (F
°
)
-230 to 2530 (C
°
) / -410 to 4510 (F
°
)
4 to 20mA
0 to 20mA
1 to 5V
0 to 5V
0 to 10V
One of following ranges depending on
results of scaling
-1999 to 9999
-199.9 to 999.9
-19.99 to 99.99
-1.999 to 9.999
-10 to 110% of setting range.
Note, however, that max. value is -1999
to 9999.
J
Output Unit Ratings and Characteristics
Ratings and characteristics conform to the output unit mounted on the
controller. For details on the ratings of the output unit, see page 2-7.
The relay output unit is already mounted on the E5EK-TPRR[][].
(When the output unit is replaced, use the E53-R.)
J
Option Unit Ratings and Characteristics
Contact input
ON: 1k
Ω
max., OFF: 100k
Ω
min.
Event inputs
No-contact input ON: residual voltage 1.5 V max., OFF: leakage current 0.1 mA
max.
Communications
Interface
:RS-232C, RS-422 or RS-485
Transmission method
:Half-duplex
Synchronization method
:Start-stop synchronization (asynchronous method)
Baud rate
:1.2/2.4/4.8/9.6/19.2 kbps
Transfer output
DC 4 to 20 mA, Permissible load impedance: 500
Ω
max., Resolution: Approx.
2600
Summary of Contents for E5EK
