Omron E5EK, User Manual

Page: 102 / 203

CHAPTER 5 PARAMETERS
E5EK
5--12
Number of steps
•
Specifies the number of steps in the current pattern.
Setting Range Unit Default
1 to 16 None 8
F
Related description
3.5 Setting Patterns (page 3-14)
F
Related parameter
All parameters in the program mode
Step 0 time (Step time)
Target SP 0 (Rate of rise programming)
to
Step 7 SP (Step time)
Target SP 7 (Rate of rise programming)
Step 8 SP (Step time)
Step 15 SP (Step time)
•
Sets the SP of steps 0 to 15 when the step time is set.
•
Sets target SP 0 to 7 when the rate of rise programming is set.
•
During temperature input, the decimal point position is dependent on the cur-
rently selected sensor, and during analog input on the results of scaling.
Setting Range Unit Default
SP lower limit to SP upper limit EU 0
F
Related description
3.5 Setting Patterns (page 3-14)
4.3 Ramp Rise Rate Setup Program (page 4-9)
F
Related parameters
All parameters in the program mode
“Input type” “Scaling upper limit” “Scaling lower limit” “Decimal point” (setup mode)
“Step time/Rate of rise programming” (expansion mode)
Program Mode
Function
Setting
See
Conditions of Use
Within the number of steps.
to
Function
Setting
See