Omron E5EK, User Manual

Page: 151 / 203

6.4 Commands and Responses
E5EK
6--9
Parameter No. Parameter Data Setting Range Mode
57 Input type 0 to 21
59 Scaling upper limit Scaling lower limit +1 to 9999
58 Scaling lower limit -1999 to scaling upper limit -1
60 Decimal point 0 to 3
30
_
C/
_
F selection 0:
_
C, 1:
_
F
61 Control output 1 assignment 0 to 6, 10 to 13
62 Control output 2 assignment 0 to 6, 10 to 13
63 Auxiliary output 1 assignment 2 to 8, 10 to 13
Set up
64 Auxiliary output 2 assignment 2 to 8, 10 to 13
Set up
65 Alarm 1 type 1 to 11
66 Alarm 1 open in alarm 0: Closed in alarm, 1: Open in alarm
67 Alarm 2 type 1 to 11
68 Alarm 2 open in alarm 0: Closed in alarm, 1: Open in alarm
69 Alarm 3 type 1 to 11
70 Alarm 3 open in alarm 0: Closed in alarm, 1: Open in alarm
71 Direct/Reverse operation 0: Reverse operation, 1: Direct operation
28 Set point upper limit *1 Set point lower limit +1 to scaling upper limit
27 Set point lower limit *1 Scaling lower limit to Set point upper limit -1
72 PID / ON/OFF 0: Advanced PID, 1: ON/OFF
35
α
0.00 to 1.00
Expansion
85 AT calculated gain 0.1 to 10.0
Expansion
36 Automatic return of display mode 0 to 99
93 AT hysteresis 0.1 to 9.9
55 LBA detection width 0.0 to 999.9
82 HBA latch 0: OFF, 1: ON
89 Travel time 1 to 999
Option
38 PV dead band 0 to 9999
p
*7 See page 5-31.
*8 0: Control output (heat), 1: Control output (cool), 2 to 4: Alarms 1 to 3, 5: HBA, 6: LBA, 7 and 8: Errors 1 to 2, 10 to 11: Time
signal 1 to 2, 12: Program end, 13: Stage output
*9 See page 5-37.
*10 During temperature input, the range becomes the range of use of the selected sensor instead of the scaling upper/lower limit
values.
*7
*8
*8
*8
*8
*9
*9
*9