3.8 Adjusting Control Operation
E5EK
3--23
In the following example, let’s change the temperature set point to
“60
_
C” from “50
_
C”.
(1) Press the
key for 1 second minimum at the currently executing
“PV/Present SP” display.
(2) The display changes to the menu display.
(3) Set the parameter to “
: program” pressing the
or
keys.
(4) Press the
key to enter the program mode. The top parameter in
the program mode “
: pattern” is displayed.
(5) Press the
key to display the [
] (“number of steps” parame-
ter).
(6) Press the
key. [
] (“step 0 SP” parameter) is displayed, and the
No.2 display indicates “50.0”.
(7) Press the
key to set the parameter to ”60.0”.
(8) Press the
key for 1 second minimum. The menu display (“
: program” parameter) is redisplayed.
(9) Select “
: level 0 mode” pressing the
or
keys, and press
the
key for 1 second minimum. The “PV/Present SP” display is
redisplayed.
Setting Example
1 second min.
1 second min.
1 second min.
1 second min.
Summary of Contents for E5EK
