Omron E5EK, User Manual

Page: 99 / 203

E5EK
5--9
Standby time monitor Conditions of Use
The controller must be in a standby
state.
•
Displays the remaining standby time. (This time is not displayed when the con-
troller is reset.)
Monitor Range
Unit
0.00 to 99.59 Hour, minute
F
Related description
4.7 Setting Running Conditions (page 4-19)
F
Related parameter
“Standby time” (level 2 mode)
Pattern elapsing time
•
Displays the time that has elapsed since the start of the pattern. When a pattern is
repeatedly executed or all patterns are executed, the time counting restarts at the
top of each pattern.
Monitor Range
Unit
0.00 to 99.59 Program time unit
When the time exceeds “99.59”, “99.59” blinks on the display.
Pattern execution count monitor
•
Displays the number of times that the current pattern has been executed. “0” is
displayed when the controller is reset or when the controller is in a standby state.
Monitor Range
Unit
0 to pattern execution count Times
F
Related parameter
“Pattern execution count” (program mode)
Level 0 Mode
Function
Monitor
See
Function
Monitor
Function
Monitor
See