Omron E5EK, User Manual

Page: 83 / 203

4.8 How to Use Event Input
E5EK
4--21
4.8 How to Use Event Input
•
When using event input, mount the option unit (E53-AKB).
•
Switching by event input is not possible on the menu display.
•
Switch event inputs ON and OFF while controller power is ON.
•
You can choose from the following six event input functions:
Run/Reset
Remote/Local
Auto/Manual
Hold/Hold cancel
Advance
Pattern select
•
Event input ON/OFF judgment is carried out on inputs of 200 ms
minimum.
•
When event inputs are used as program advance input, the program
step is advanced at the rising (OFF
→
ON) edge of the input signal.
When event inputs are used as run/reset input, program operation is
stopped (reset) at the rising (OFF
→
ON) edge of the input signal, and
program operation is started (run) at the falling (ON
→
OFF) edge.
Other signals are accepted at all times.
•
Set event input assignments in the “event input assignments 1 and 2”
parameters (option mode).
•
The following table shows the relationship between the settings and
functions of the “event input assignment 1 to 2” parameters.
Setting Function
Event input disabled
OFF
→
ON: Reset /ON
→
OFF: Run
ON: Remote /OFF: Local
ON: Manual /OFF: Auto
ON: Hold /OFF: Hold cancel
Execute at OFF
→
ON
Specify by combination of two inputs (*1) Specify by combination of two inputs (*1).
*1 The following table shows the relationship between pattern select No. and
pattern No.
Pattern No. 0 1 2 3
Pattern select 0
f f
Pattern select 1
f f
J
Input
assignments