CHAPTER 5 PARAMETERS
E5EK
5--8
Hold
•
This parameter can only be used for monitoring when the controller is reset.
•
Pauses (holds) or cancels program operation.
•
When the event input to which “hold/hold cancel” is assigned is ON, [
] (hold) is
displayed, and when OFF [
] (hold cancel) is displayed.
•
In addition to the setting of this parameter, hold is canceled by the following
conditions:
Setting Range
Default
OFF
: Hold cancel /
ON
: Hold
F
Related description
4.4 Program Operation (page 4-13)
4.8 How to Use Event Input (page 4-21)
F
Related parameters
“Event input assignment 1 to 2” (option mode)
Advance
•
This parameter can only be used for monitoring when the controller is reset.
•
Forcibly advances program operation by one step.
•
When the event input to which “hold/hold cancel” is assigned is ON, [
]
(advance) is displayed.
•
Selecting this parameter, it is set to [
] (OFF).
•
When [
] (ON) is selected, program operation is advanced by one step.
•
After program execution is completed, the setting automatically returns to [
].
•
Hold is also continued after the program step is advanced when the program is
executed in a hold state.
F
Related description
4.4 Program Operation (page 4-13)
4.8 How to Use Event Input (page 4-21)
F
Related parameters
“Event input assignment 1 to 2” (option mode)
Level 0 Mode
Function
Setting
See
Function
Example
of use
See
Summary of Contents for E5EK
