Ohmart Vega W-4510, Technical Reference Hardware Manual

Page: 83 / 162

Setup
66 W-4510 Weigh Scale Technical Reference Manual
Product codes
Product codes are a convenient method of grouping variables that are associated with a
unique product. Channels #1 and #2 use unique product codes. You can store the set of
parameters listed in the table in Appendix I into each Product Code Table.
Channel#1 product codes
Channel #1 handles the process sensor input and uses product codes 0–8. Use access level
0 to display the product code tables and level 1 to setup or change values in the table.
Channel #2 product code
Channel#2 handles optional sensor input (e.g., tachometer) and uses product code 9. Use
access level 0 to display the product code table and level 1 to setup or change values to the
table.
Directly select the product code from screen 3 or through the calibration loop on screen 18.
Use screen 527 to setup the product code by performing the following procedure.