Ohmart Vega W-4510, Technical Reference Hardware Manual

Page: 64 / 162

Setup
W-4510 Weigh Scale Technical Reference Manual 47
Password functions
052 ENTER PASSWORD
XXXX
ACCESS LEVEL = X
LEVEL OF ACCESS
053 CHANGE PASSWORD
LEVEL 1 PASSWORD
LEVEL 2 PASSWORD
LEVEL 3 PASSWORD
Figure 22: Password function screens
The default passwords are:
Table 11: Access levels and passwords
Access Level Password Access and Description
0—Operator Access No password No editing and limits the access to most of the gauges screens
1—Supervisor Access 0011 Access to most of the gauge screens (i.e., setup & calibration) but no
direct editing of parameters in any of the functional blocks (e.g.,
FreqIn Block at address 520)
2—Installation Access 0022 Complete access to all gauge parameters and functions
Procedure 5: Input password
1. From the 092 screen, type screen number 052 and press ENTER
2. On the 052 screen, type the password to the access level you need
3. Press ENTER
Procedure 6: Change password
1. From the 092 screen, type screen number 053 and press ENTER
2. From 053 CHANGE PASSWORD screen, press SELECT to choose the access
level for the password you want to change and press ENTER
3. From 054 LEVEL 1 PASSWORD , enter new 4-digit password and press ENTER
4. From 055 LEVEL 2 PASSWORD , enter new 4-digit password and press ENTER
5. Save to EEPROM
6. Connect write protect jumper, JP17 and save to EEPROM
7. Disconnect the write protect jumper, JP17. This protects the information in the
EEPROM.