Ohmart Vega W-4510, Technical Reference Hardware Manual

Page: 151 / 162

Appendix I: Parameter blocks
134 W-4510 Weigh Scale Technical Reference Manual
Screen 525 Totalizer Block
525 TOTALS CHAN #1
ITEM 000 NEXT=000
CURRENT VAL NEW VAL
00000 00000
Figure 67: Totalizer screen
The base address for screen 525 TOTALS CHAN #1 is 529, item 1072.
Table 29: Screen 525 Totalizer block #1
Item# Parameter Name Parameter description
0 STATUS 0=normal counting, 1=Reset, 2=Hold, 3=Reset/Hold
1 DATA POINTER Location of Rate data to totalize
2 REFERENCE Time and weight conversion from Rate to Total
3 PRESET LOW ENTRY Low 4-digits of 8-digit Preset entry
4 PRESET HIGH ENTRY High 4-digits of 8-digit Preset entry
5 REMOTE TOTALIZER
DRIVE Changes to 1 for each count added into Total. Changes back to 0 in
50milliseconds. 10 counts per second maximum
6 PRESET ALARM Equals 1 when 8-digit Total exceeds 8-digit Preset Entry. Raise Preset or
Reset Total to clear alarm
7 LOW TOTAL Lower 4-digits of 8-digit totalizer
8 HIGH TOTAL Upper 4-digits of 8-digit totalizer
Table 30: Screen 525 Totalizer block #2
Item# Parameter Name Parameter description
8 STATUS 0=normal counting, 1=Reset, 2=Hold, 3=Reset/Hold
9 DATA POINTER Location of Rate data to totalize
10 REFERENCE Time and weight conversion from Rate to Total
11 PRESET LOW ENTRY Low 4-digits of 8-digit Preset entry
12 PRESET HIGH ENTRY High 4-digits of 8-digit Preset entry
13 REMOTE TOTALIZER
DRIVE Changes to 1 for each count added into Total. Changes back to 0 in
50 milliseconds. 10 counts per second maximum
14 PRESET ALARM Equals 1 when 8-digit Total exceeds 8-digit Preset Entry. Raise Preset or
Reset Total to clear alarm
15 LOW TOTAL Lower 4-digits of 8-digit totalizer
16 HIGH TOTAL Upper 4-digits of 8-digit totalizer