Ohmart Vega W-4510, Technical Reference Hardware Manual

Page: 157 / 162

Appendix II: Auto zero feature
140 W-4510 Weigh Scale Technical Reference Manual
529 APP CODE ACCESS
ADR 2700 _
CURRENT VAL NEW VAL
0 _
Figure 70: Auto zero screen
Table 33: Screen 529 Auto Zero feature
Item# Parameter Name Parameter description
2700 AZ ENABLE 0=AZ Disabled, 1=AZ Enabled
2701
AZ STATUS 0=AZ not currently running. 1=AZ sample interval active
2702 AZ CYCLES If AZ is active, how many AZs done so far
2703 AZC 1 VECTOR Address of blending line belt LDC (0=running, 1=not running)
2704 AZC 2 VECTOR Address of dry bin belt LDC (0=running, 1=not running)
2705 AZC 3 VECTOR Address of undefined LDC (not used)
2706 AZ PAUSE TIME Amount of time (in quarter seconds) to wait after dry bin LDC trips before
starting AZ counter used to determine when the pause time has elapsed
2707 AZ TIMER Time has elapsed
2708 AZ STATE Used internally to synchronize AZ function
2709 AZ SAMPLING 1=wait over, 2=still waiting
2710 AZ CUTOFF ENABLE 0=Disable, 1=Enable
2711 AZ CUT OFF
VECTOR 2709 for AZ-time out
Item 2701 displays whether the auto zero is enabled or not
Item 2706 is the wait state to see that all process is cleared (entered in ¼ seconds)
The auto zero feature starts a zero and if it finishes one it will start a new one.
Item 2702 displays how many times it has gone through the auto zero cycle this session. If it
gets through at lease one auto zero then it will save the average of all cycles completed.
Note: The list of auto zeros are not in chronological order. Look for the oldest entry. Only the
last 20 zeros are saved.