Ohmart Vega W-4510, Technical Reference Hardware Manual

Page: 68 / 162

Setup
W-4510 Weigh Scale Technical Reference Manual 51
Table 13: Smart Pro CPU board test point information
TP# Section Reference
TP1 Analog output#1 Voltage signal
TP2 AC/DC power +5VDC
TP3 AC/DC power +5VDC common
TP4 AC/DC power –15VDC
TP5 AC/DC power +15VDC
TP6 AC/DC power 15VDC common
TP7 Analog output #2 Voltage signal
TP8 Analog output #2 Voltage signal
Procedure 7: Select output type
1. From the 063 SELECT OUTPUT TYPE , select either of the following options;
•
4–20 or 0–20 Channel #1
•
4–20 or 0–20 Channel #2
Press ENTER
Note: If you require a voltage output, choose 0–20 on screen 63 and connect a
jumper for Channel #1 to JP1 and Channel #2 to JP2
2. Connect the write protect jumper JP17
3. Save to EEPROM
4. Disconnect the write protect jumper, JP17. This protects the information in the
EEPROM.