Ohmart Vega W-4510, Technical Reference Hardware Manual

Page: 70 / 162

Setup
W-4510 Weigh Scale Technical Reference Manual 53
Procedure 9: Setup analog output Channel #2
1. From 065 ANALOG OUTPUTS screen, select SET ANALOG OUTPUT SPAN and
press ENTER
2. From 060 ANALOG OUTPUT SPAN screen, select SET OUT CHAN#2 SPAN
and press ENTER
3. From 062 TYPE OF ANALOG OUTPUT UNITS TO USE screen, select either
•
USE STANDARD UNITS
•
USE RATE UNITS
Press ENTER
4. If you select USE STANDARD UNITS perform the following steps:
•
From 064 SET ANALOG OUTPUT #2 SPAN , select SET LOW LIMIT and
press ENTER
•
From 066 SET LOW LIMIT screen, enter the new setting and press ENTER
•
Return to screen 064 by pressing PREVIOUS SCREEN
•
From screen 064, press SELECT to choose SET HIGH LIMIT AND press
ENTER
•
From 068 SET HIGH LIMIT , enter the new setting and press ENTER
5. If you select USE RATE UNITS perform the following steps:
•
From 064 SET ANALOG OUTPUT #2 SPAN screen, select SET LOW LIMIT
and press ENTER
•
From 067 SET LOW LIMIT screen, enter the new setting and press ENTER
•
Return to screen 064 by pressing PREVIOUS SCREEN
•
From 064 screen, press SELECT to choose SET HIGH LIMIT and press
ENTER
•
From 069 SET HIGH LIMIT screen, enter the new setting and press ENTER
6. Connect the write protect jumper JP17
7. Save to EEPROM
8. Disconnect the write protect jumper, JP17. This protects the information in the
EEPROM.