Ohmart Vega W-4510, Technical Reference Hardware Manual

Page: 76 / 162

Setup
W-4510 Weigh Scale Technical Reference Manual 59
Procedure 11: Setup units of measurement for Channel #1 and #2 (continued)
5. From 009 SELECT UNITS screen, choose SELECT CHAN#2 UNITS and press
ENTER
6. From 087 CHANGE UNITS screen, select one of the following units of measure:
•
SPEED
•
TEMPERATURE
•
CUSTOM
7. For example, If you choose SPEED , on screen 088 you can choose from the following
measurements:
•
FT/MIN
•
MTR/MIN
•
RPM
•
Custom
If you choose TEMPERATURE , on screen 089 you can choose from the following
measurements:
•
DEG C
•
DEG F
•
Custom
IF you choose CUSTOM , from 220 SETUP CUSTOM , you can select any of the
following functions:
•
CHANGE UNITS TEXT , in screen 221 NEW UNITS, type in new units and select
YES and press ENTER to save data
•
CHANGE CONV. FACTOR , in screen 222 NEW FACTOR, type in new factor and
select YES and press ENTER to save data
•
CHANGE CONV. EXPNT , in screen 223 CONV. EXPONENT, type in new
exponent and select YES and press ENTER to save data
8. Connect the write protect jumper JP17
9. Save to EEPROM
10 Disconnect the write protect jumper, JP17. This protects the information in the
EEPROM.