Oce VarioPrint 2100, User Manual

Page: 78 / 308

78 Chapter 3 Get to know the Océ VarioPrint
®
2100/2110
Possible actions on jobs in the job queue
How to select and inspect a job in the job queue
1.
Use the arrow-up and arrow-down keys to select a job.
This action is executed in the job queue and in the job queue manager.
2.
Press the selection key to open the job.
The 'Basic settings' of the job appear.
[26]
[26] Basic settings
3.
You can view the 'Basic settings' or navigate to the 'Original' and 'Print' settings in
the appropriate menus.
4.
Press the selection key again to close the view.
'Move to top' The function allows you to give priority to a job. The selected
job moves to the position below the job that is currently
printed. The selected job is printed when the current print job
is ready.
'Hold'
'Release' You can 'Hold' a job and 'Release' a job. A job on hold will
not start to print.
If 'Processing' in the 'System manager' is set to 'Keep
sequence', the Océ VarioPrint
®
2100/2110 stops if the job on
hold becomes the first in the job queue.
If 'Processing' is set to 'Keep going', other jobs move over the
job on hold.
The colour of the job icon changes to orange for a job on hold
and to grey blue for a released job.
[30] The job queue manager (2 – 2)
Function Description