Oce VarioPrint 2100, User Manual

Page: 267 / 308

267
Load the tab sheets
Load the tab sheets
Introduction
Task for operators, key operators
When you print on tab sheets, the sheets can have the following destinations.
■
The finisher
■
The upper output
■
The external finisher (if configured).
Note:
You can not use tab sheets in combination with the optional booklet maker.
Depending on the destination of the print job, you must load different sets of tab
sheets.
The following table shows the types of tab sheets that are required for the
destinations.
[77]
How to load tab sheets when you print to the finisher and the upper output
1.
Take a pack of reverse collated tab sheets.
Note:
In reverse collated tab sheets, the tab sheets are counted down from the last
number to 1.
2.
Do the steps 1 - 5 of the procedure for standard media.
3.
Put the tab sheets face down and header down into the paper tray.
[77] Types of tab sheets
Destination Type of tab sheet
■
Finisher
■
Upper output
Reverse collated tab sheets
In reverse collated tab sheets, the highest number is on
top of the set. The lowest number is at the bottom (for
example 5, 4, 3, 2, 1)
External finisher Straight collated tab sheets
In straight collated tab sheets, the lowest number is on
top of the set. The highest number is at the bottom (for
example 1, 2, 3, 4, 5)