Oce VarioPrint 2100, User Manual

Page: 277 / 308

277
Replace stapler cartridge 3 (optional off-line stapler)
Replace stapler cartridge 3 (optional off-line stapler)
Illustration
[93]
[93] Location of the off-line stapler
How to replace the stapler cartridge of stapler 3
1.
Open the front door of the finisher.
The stapler cartridge is located in the left lower-hand corner of the finisher.
2.
Tilt the stapler cartridge forward.
3.
In the same movement, remove the stapler cartridge from the stapler.
4.
Remove the stapler cartridge from the stapler.
5.
Remove the loose staples if necessary.
Note: Make sure that no staples fall into the finisher.
6.
Take a new cartridge, type S3.
7.
Remove the packing material.
8.
Slide the stapler cartridge into the stapler.
Note:
The correct position of the off-line stapler cartridge is upside down.
9.
Press until the stapler cartridge clicks into place.
Note:
If the new stapler cartridge does not fit, put back the old stapler cartridge and
call service.
10.
Close the front door of the finisher.