manualshive.com logo in svg

Nivus NivuFlow Mobile 600, Instruction Manual, Page: 95 / 125

Share
Download
Nivus NivuFlow Mobile 600 Instruction Manual Download Page 95

Parameter Setting

page 95

rev. 00 / 04.09.2017

30.2  Region Settings

The following settings can be configured here:

•  (Operation) Language 
•  Date format
•  Units for measurement values 

Here it is possible to distinct between stored and displayed measurement values.

Fig. 30-2 

Region Settings - Language – Date Format

30.2.1  (Operation) Language

All listed languages (Fig. 30-2) either contain wordings in the according language or alterna-

tively in English.

30.2.2  Date Format

The date formats below can be set:

•  DD.MM.YYYY (Day/Month/Year)
•  MM/DD/YYYY (Month/Day/Year)

30.2.3  Units

This menu can be used to adjust various country-specific and unit-specific settings for the 

indication of measurement values.

>Decimal Separators<

•  Comma
•  Point

The decimal separators specified here are used only for representation on the operation 

module display.

Summary of Contents for NivuFlow Mobile 600






























































































































Reviews:

No comments