Nivus NivuFlow Mobile 600, Instruction Manual, Page: 31 / 125

Installation and Connection
page 31 rev. 00 / 04.09.2017
1 Power adapter/battery charger with connection cable for the multifunction socket on
NFM or the charging tray
2 LED indicating the charging status
Fig. 15-1 Power adapter/battery charger
Disconnect the power adapter/battery charger from mains power (Fig. 15-1) before you con-
nect/disconnect it to/from a rechargeable battery.
The built-in LED (Fig. 15-1 pos. 2) indicates the charging status.
Colour/LED Status Description
Yellow Charging process
Green Trickle charging
LED not lit Reversed polarity, short circuit or no mains power
Charging the inserted battery pack
F c
See chapter „15.1.3 Operation/Charging with direct connection to mains power“.
Charging the removed battery pack
 Ü
Procedure:
1. Plug the battery pack (Fig. 15-2 pos. 1) into the charging tray (Fig. 15-2 pos. 2) with
the upside down.
2. Plug the power adapter/battery charger (with connection cable for multifunction
socket) into the charging socket (Fig. 15-2 pos. 3) and connect to mains power
supply. The batteries are charged via the charging contacts (Fig. 15-2 pos. 4).
Observe the LED colour/status on the power adapter/battery charger.
1 Rechargeable battery pack (plugged upside down)