Product Specification
page 21
rev. 00 / 04.09.2017
Sensors
The specifications of the accompanying sensors can be found in the according instruction
manuals or technical descriptions.
11 Configuration
11.1 Device Types and Accessories
NFM Transmitter
•
NFM-0600:
Portable flow measurement transmitter for full pipelines
F
c
For more information on power supply, display and operating module and more acces-
sories see chapter „43 Accessories“ starting on page 121, the current price list or
contact NIVUS.
11.2 Delivery
The standard delivery of the NivuFlow Mobile 600 basically contains:
• Transmitter type NivuFlow Mobile 600 (according to shipping documents)
• Ring magnet (solenoid)
• USB stick
• Screw driver for hexagon socket screws
• PU stickers (two pieces: 31x17x3.5 mm) to avoid vacuum in the enclosure in case of
being returned (via airfreight) to NIVUS (e. g. for maintenance)
• Instruction manual (incl. certificate(s) of conformity) containing any relevant informa-
tion on how to operate the NivuFlow
Check extra accessories depending on your order and by using the delivery note.
11.3 Reception inspection
Check the packaging for visible damage immediately after receipt. Any possible damage in
transit shall be instantly reported to the carrier. Furthermore a written report shall be sent to
NIVUS GmbH in Eppingen.
Incomplete deliveries shall be reported in writing either to your local representative or directly
to the NIVUS head office in Eppingen within two weeks.
Note
Mistakes cannot be rectified later!
Â
Ü
Prior to the first use:
1. Open enclosure cover.
2. Remove both PU stickers (two pieces; 31x17x3.5 mm), if available, from the left
and right enclosure frame (Fig. 11-1 pos. 1). The stickers have been attached prior
to shipping (via airfreight) to prevent the enclosure from getting closed and to avoid
vacuum formation due to extreme temperature changes during shipping.