Instruction manual
NivuFlow Mobile 600
page 120
rev. 00 / 04.09.2017
41 Cleaning
41.1 Transmitter
WARNING
Disconnect instrument from mains power
Observe to disconnect the transmitter from mains power.
Disregarding may induce the risk of electrical shocks.
When closed and locked the NivuFlow Mobile enclosure complies with IP68 protection degree
and hence is less sensitive. Do not use high-pressure cleaners however.
Do not use sharp cleansing agents or solvents. Light household cleaners or soapy water can
be used instead.
41.2 Sensors
Information on how to maintain and to clean the sensors shall be necessarily observed. Such
information can be found in the according technical description or instruction manual.
Technical description or instruction manual are part of the sensor delivery.
42 Dismantling/Disposal
Improper Disposal may be harmful to the Environment.
Â
Ü
Always dispose equipment components and packaging materials according to applicable
local regulations on environmental standards for electronic products.
1. Disconnect the instrument from mains power.
2. Remove connected cables.
3. Remove batteries and if defect dispose accordingly
4. Remove the transmitter’s buffer battery and separately dispose accordingly.
EC WEEE-Directive
This symbol indicates that the Directive 2012/19/EU on waste electrical and electronic
equipment requirements shall be observed on the disposal of the equipment. The unit con-
tains a buffer battery (Lithium coin cell), which must be disposed separately.