manualshive.com logo in svg

Nivus NivuFlow Mobile 600, Instruction Manual, Page: 19 / 125

Share
Download
Nivus NivuFlow Mobile 600 Instruction Manual Download Page 19

Product Specification

page 19

rev. 00 / 04.09.2017

9.1 

Enclosure Dimensions

Fig. 9-2 

Dimensions

9.2 

Connectable Sensors

The photo below provides an overview on the connectable sensors.

1 

Clamp-on sensor pair type NIC-CO01

2 

Pipe sensor NIS -V200RL0

Fig. 9-3 

Connectable sensors

9.3 

Device identification

The instructions contained within this manual are valid only for the type of device specified on 

the title page.
The name plate is fixed on the side of the enclosure and contains the following:

•  Name and address of the manufacturer
•  CE label
•  Information on type and series, serial no. if available
•  Power supply

In case of enquiries and ordering replacement parts it is important to specify article number 

as well as the serial number of the respective transmitter or sensor. This ensures correct and 

quick processing.

Summary of Contents for NivuFlow Mobile 600






























































































































Reviews:

No comments