Instruction manual
NivuFlow Mobile 600
page 104
rev. 00 / 04.09.2017
3. Specify the new number of digits.
Here you can enter any desired number, however more than a maximum of five
digits will not be accepted.
4. Go "Back" several times to save the parameters.
Note
When setting the number of digits observe the measurement accuracy of the sensors and
the measurement units set.
Example: the maximum resolution of the temperature sensor is 0.1 K.
33 Parameter Menu Battery (12V)
Use this menu to define the (rechargeable) battery type used as well as the according number
of batteries.
Correct Indication of Battery Capacity
The capacity indication in the >System< / >Information< menu is reliable only as long as
fully charged batteries are used and the battery type used as well as the according number
of batteries are specified here..
Select from:
•
1 x NFM0 ZAPB 1215
One NIVUS rechargeable battery installed. The battery specifications are known and
available from the software.
Setting the number of the NIVUS batteries used enables the correct indication of the
battery performance in the >System</>Information< menu.
•
2 x NFM0 ZAPB 1215
Two NIVUS rechargeable batteries installed.
•
BATTERY_MODE_USER
The capacity [Ah] must be specified to correctly indicate the (rechargeable) battery
performance in the >System</>Information< menu.
Fig. 33-1
Menu Battery (12V)