Instruction manual
NivuFlow Mobile 600
page 34
rev. 00 / 04.09.2017
• Material of pipe lining
• Medium to measure (type of liquid)
Based on these specifications the transmitter calculates the accurate position data for the
sensor installation. The mounting data can be viewed on the display and operation module
(smartphone, tablet, notebook etc.).
Fig. 16-1
Output of mounting data
The path arrangements below are usual for clamp-on flow metering:
•
“Diametrical \” mode
•
“Diametrical V” mode
•
“Diametrical W” mode
The mounting distance between both sensors is the “clear distance“.
Fig. 16-2
sender
/re
c
e
iv
er
sender
/re
c
e
iv
er
Example “Diametrical \” mode
Fig. 16-3
s
ender/re
c
e
iv
er
s
ender/re
c
e
iv
er
Example “Diametrical V” mode