Instruction manual
NivuFlow Mobile 600
page 22
rev. 00 / 04.09.2017
11.4 Storage
The permissible maximum values regarding ambient conditions such as temperature and
humidity according to chapter „10 Specifications“ shall be necessarily observed.
Protect the NivuFlow Mobile from corrosive or organic solvent vapours, radioactive radiation as
well as strong electromagnetic radiation.
Â
Ü
To store the instrument:
1. Remove the batteries
2. If the hoop guards should be mounted to attach the Connector Box remove the
guards (lack of space) and attach the rubber buffers instead.
Note
Necessarily attach the rubber buffers
• to prevent the hidden fastening plates on the reverse side of the NFM 600 in the screw
channel from getting lost. The fastening plates are essential since they provide the
threads to fasten the hoop guards and additionally stabilise the guards on the NFM.
• because the buffers are designed as impact protection for NFM connections and protect
the sockets etc. from being damaged.
11.5 Transport
Take precautionary measures and use lashing straps or similar to protect the NivuFlow from
heavy shocks or vibrations.
11.6 Return
In case of a required reshipment return the unit at customer cost to NIVUS GmbH in Eppingen
using the original packaging.
Insufficiently franked shipments will not be accepted!
Â
Ü
Prior to shipping (via airfreight):
1. Attach PU stickers (two pieces; 31x17x3.5 mm) right and left on the enclosure
frame (Fig. 11-1 pos. 1). This prevents the enclosure from getting closed and elimi-
nates vacuum formation due to extreme temperature changes.
2. Place the NivuFlow Mobile 600 safely in the original packaging for transport.
Fig. 11-1
Attachment position for PU stickers