Nikon DS-L4 Instructions Manual Download Page 35

Page: 35 / 196

Chapter 5

Using Menus

Ple
a

se Re

rst

5.1.2

Using the LIVE Menu

You can perform operations on the DS-L4 from the menu screens.

Display the necessary menu screen from the LIVE or VIEW menu on the left side of the screen.

Items displayed in the LIVE menu

[MENU] button

Displays the MAIN menu.

[CAPTURE] button

This button saves the data of the image

currently displayed on the screen as a still

image.

[E.ZOOM] button

Magnify the image. The selected magnification

is displayed on the button. The section to be

enlarged in the image can be changed.

[SCENE/CSM] button

Use this button to select the scene mode or
custom setting.

[EXP CMP] / [CAM GAIN] buttons

Use [EXP CMP] to change the auto-exposure

value to brighten or darken the entire screen.

Use [CAM GAIN] to adjust the camera sensitivity

if the exposure mode is set to M (manual).

[WHITE BL] button

Use this button to obtain and set the white

balance. This button is displayed only if a color

camera is connected.

[FREEZE] button

When you tap this button, the DS-L4 continues to
display the still image that was displayed when the
button was tapped. To stop displaying the still
image, tap the button again.

Exposure mode

P (program AE), M (manual), or F

(focus-priority AE) is displayed as the

exposure mode.

Exposure time

If capturing requires two seconds or longer, the
DS-L4 performs a countdown in seconds.

[INFO] button

Displays the INFO window.

[PLAYBACK] button

Places the DS-L4 in playback mode, for

displaying recorded images. The image taken or

accessed last is displayed.

Start/stop recording

When you tap this button, the DS-L4 starts
recording a motion image. To stop the
recording, tap this button again.

[AE LOCK] button

This button fixes the exposure value at the
current exposure value. To release the AE lock,
tap the button again.

[NOSEPIECE] button

Displays the NOSEPIECE window. In the window,
you can rotate the motorized nosepiece of the
microscope to switch the objective.

[SETTINGS] button

Tapping this button displays the four buttons:
•

[MENU POS] button

Switches the menu display position between left
and right.

•

[DS SETUP] button

Allows you to set up the microscope.

•

[MIC SETUP] button

Electrically controls motorized accessories of the
microscope from the DS-L4.

•

[SHUT DOWN] button

Terminates the DS-L4 application.

Hides/shows the second menu column

Summary of Contents for DS-L4





































































































































































































Search results

Summary of Contents for DS-L4

Reviews:

Related manuals for DS-L4

Brands by name

Popular brands

Nikon DS-L4, Instructions Manual

Search results

Summary of Contents for DS-L4

Reviews:

Related manuals for DS-L4

Brands by name

Popular brands